Wire Rods
EC grade and alloy aluminium wire rods from our captive continuous casting and rolling plant at Silvassa, for conductor, cable, welding-wire and engineering customers.
Full wire rod range
As listed in the JSK catalogue.
EC grade wire rod. Electrical conductor grade aluminium.
Alloy wire rod. 1120, 3003, 3102, 5052, 5054, 6061, 6101, 6201 (M temper and T4 online solutionised), 6063, 8176, AlZr, AL59, AL7 and more.
Deoxy wire rod. For steel de-oxidation, up to 22.00 mm diameter.
1000 Series Aluminium Rods
Made from high-purity aluminium for electrical conductors, power cables, wires and allied applications that need excellent conductivity and formability.
Produced by advanced casting and rolling, our rods deliver consistent quality, a superior surface finish and reliable performance in demanding electrical and industrial use.
Key grades
- 1100
- 1120
- 1350
- 1370
- Grade 2, IS 4026
Standards: ASTM B233 / B230, EN 1715-2 / 573-3, IS 4026 / 733, AS 2848
Key advantages
- High electrical conductivity for efficient current transmission
- Excellent ductility and formability for wire drawing
- Superior surface quality for smooth processing and fewer breaks
- Reliable performance during stranding and cable making
- Suited to high-volume conductor and cable production
- Stringent quality control
- Compliance with international standards
Applications
- Overhead and transmission conductors
- Power and distribution cables
- Electrical wires and stranded conductors
- Transformer and electrical equipment
- Industrial electrical applications
- Renewable energy and utility projects
- General engineering and fabrication
Chemical, electrical and mechanical properties
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ga | B | Ti | V | Ti+V | Others each | Others total | Al (min) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1100 | 0.95 | 0.95 | 0.05–0.20 | 0.05 | – | – | 0.10 | – | – | – | – | – | 0.05 | 0.15 | 99.00 |
| 1120 | 0.10 | 0.40 | 0.05–0.35 | 0.01 | 0.20 | 0.01 | 0.05 | 0.03 | 0.05 | – | – | 0.02 | 0.03 | 0.10 | 99.20 |
| 1350 | 0.10 | 0.40 | 0.05 | 0.01 | – | 0.01 | 0.05 | 0.03 | 0.05 | – | – | 0.02 | 0.03 | 0.10 | 99.50 |
| 1370 | 0.10 | 0.25 | 0.02 | 0.01 | 0.02 | 0.01 | 0.04 | 0.03 | 0.02 | – | – | 0.02 | 0.03 | 0.10 | 99.70 |
| Grade 2, IS 4026 | 0.13 | 0.30 | 0.04 | 0.01 | – | Cr+Zr 0.01 each | – | – | – | – | – | 0.02 | 0.03 | 0.10 | 99.60 |
| Alloy | Product code | Temper | Diameter (mm) | Tensile min (MPa) | Tensile max (MPa) | Elongation (%) | Resistivity (nΩ·m) | Conductivity (% IACS) |
|---|---|---|---|---|---|---|---|---|
| 1100 | 1100 | – | 9.50 ± 0.50 | 95 | 125 | 16.0–16.8 | 30.372 | 56.77 |
| 1120 | 1120 | – | 15.00 ± 0.50 | 145 | 151 | 6.8–7.6 | 29.725 | 58.0 |
| 1120 | EC-2HO | O | 9.50 ± 0.50 | – | 70 | 20 | 27.367 | 63.0 |
| 1120 | EC-2HO | O | 12.50 ± 0.50 | – | 70 | 20 | 27.367 | 63.0 |
| 1120 | EC-2H01 | O | 9.50 ± 0.50 | – | 90 | 15 | 27.899 | 61.8 |
| 1120 | EC-2H01 | O | 12.50 ± 0.50 | – | 90 | 15 | 27.899 | 61.8 |
| 1120 | EC-2T2 | H2 | 9.50 ± 0.50 | 93 | 123 | 4.0–8.0 | 28.264 | 61.0 |
| 1120 | EC-2T2 | H2 | 12.50 ± 0.50 | 93 | 123 | 4.0–8.0 | 28.264 | 61.0 |
| 1120 | EC-2H4 | H4 | 9.50 ± 0.50 | 93 | 123 | 4.0–8.0 | 28.264 | 61.0 |
| 1120 | EC-2H4 | H4 | 12.50 ± 0.50 | 93 | 123 | 4.0–8.0 | 28.264 | 61.0 |
| 1350 / 1370 | EC-2H11 | H11 | 9.50 ± 0.50 | 80 | 95 | 25 | 27.852 | 61.9 |
| 1350 / 1370 | EC-2H11 | H11 | 12.50 ± 0.50 | 80 | 95 | 25 | 27.852 | 61.9 |
| 1350 / 1370 | EC-2H12 | H12 | 9.50 ± 0.50 | 83 | 117 | 4.0–8.0 | 28.035 | 61.5 |
| 1350 / 1370 | EC-2H12 | H12 | 12.50 ± 0.50 | 83 | 117 | 4.0–8.0 | 28.035 | 61.5 |
| 1350 / 1370 | EC-2H14 | H14 | 9.50 ± 0.50 | 103 | 138 | 4.0–8.0 | 28.080 | 61.4 |
| 1350 / 1370 | EC-2H14 | H14 | 12.50 ± 0.50 | 103 | 138 | 4.0–8.0 | 28.080 | 61.4 |
| 1350 / 1370 | EC-2H16 | H16 | 9.50 ± 0.50 | 117 | 152 | 4.0–8.0 | 28.126 | 61.3 |
| 1350 / 1370 | EC-2H16 | H16 | 12.50 ± 0.50 | 117 | 152 | 4.0–8.0 | 28.126 | 61.3 |
| 1350 / 1370 | EC-2H19 | H19 | 9.50 ± 0.50 | 93 | 123 | 4.0–8.0 | 28.172 | 61.2 |
| 1350 / 1370 | EC-2H19 | H19 | 12.50 ± 0.50 | 93 | 123 | 4.0–8.0 | 28.172 | 61.2 |
| Grade 2, IS 4026 | EC-211 | G2-T1 | 9.50 ± 0.50 | 64 | 98 | 12 | 28.035 | 61.5 |
| Grade 2, IS 4026 | EC-212 | G2-T1 | 9.50 ± 0.50 | 98 | 123 | 8 | 28.035 | 61.5 |
| Grade 2, IS 4026 | EC-212 | G2-T1 | 12.50 ± 0.50 | 98 | 123 | 8 | 28.035 | 61.5 |
| Grade 2, IS 4026 | EC-221 | G2-T2 | 9.50 ± 0.50 | 64 | 98 | 12 | 28.264 | 61.0 |
| Grade 2, IS 4026 | EC-222 | G2-T2 | 9.50 ± 0.50 | 83 | 123 | 8 | 28.264 | 61.0 |
Values are indicative of standard specifications. We also make customised grades to international standards and specific customer requirements, in multiple sizes and configurations.
4000 Series Aluminium Alloy Rods
Developed for welding wire, with excellent fluidity, weldability and metallurgical consistency, for welding consumable makers across industrial, automotive, fabrication and engineering sectors.
Alloy 4043 is one of the most widely used materials for MIG welding and brazing. It is particularly suited to welding heat-treatable alloys, especially the 6xxx series, and to repair welding of Al-Si cast alloys such as 353 and A356.
Key grades
- 4043
- 4043A
Standards: EN 573-3, IS 733, AS 2848, AWS A5.10
Key advantages
- Uniform mechanical properties
- Excellent formability and workability
- Compliance with international standards, including AWS A5.10
Applications
- Welding filler wires
- Spray and flame metallising wires
- Welding of alloys 5052, 6061 and 6063
- Repair welding of casting alloys 43, 355, 356 and 214
- TIG, MIG, electrode and brazing wire manufacture
Chemical, electrical and mechanical properties
| Alloy | Si | Fe | Cu | Ti | Zn | Mn | Mg | Others each | Others total | Al |
|---|---|---|---|---|---|---|---|---|---|---|
| 4043 | 4.50–6.00 | 0.60 | 0.30 | 0.15 | 0.10 | 0.15 | 0.20 | 0.05 | 0.15 | Rem. |
| Alloy | Product code | Temper | Diameter (mm) | Tensile min (MPa) | Elongation (%) | Resistivity (nΩ·m) | Conductivity (% IACS) |
|---|---|---|---|---|---|---|---|
| 4043 | Alloy W/R 4043 | M | 9.50 ± 0.50 | 150 | 16.00 | 31.93 | 54.00 |
| 4043 | Alloy wire 4043 | – | 6.00 ± 0.06 | 170 | 1.50 | 30.50 | 56.53 |
| 4043 | Alloy wire 4043 | T8 | 4.00 ± 0.04 | 190 | 1.50 | 30.50 | 56.53 |
| 4043 | Alloy wire 4043 | – | 3.00 ± 0.03 | 200 | 2.00 | 30.50 | 56.53 |
Values are indicative of standard specifications. We also make customised grades to international standards and specific customer requirements, in multiple sizes and configurations.
Supply formats
- Wire rodCoils of 2.0 to 3.0 MT
- Drawn wire, 3.0 to 6.0 mmCoils up to 1.0 MT
5000 Series Aluminium Alloy Rods
For applications that need strength, durability and superior corrosion resistance, particularly in marine and industrial settings.
These alloys resist saltwater exposure and perform reliably even at temperatures near absolute zero, giving consistent results in extreme conditions.
Key grades
- 5005
- 5050
- 5052
- 5154
- 5754
Standards: EN 573-3, IS 733, AS 2848
Key advantages
- Excellent corrosion resistance, including marine environments
- Good formability
- High strength-to-weight ratio
- Reliable performance at extreme temperatures
Applications
- Metal wire mesh and industrial strainers
- Marine and offshore components
- Automotive and industrial rivets
- Cable armouring and braiding
- Architectural and signage applications
- Fasteners, hangers and specialty components
Chemical, electrical and mechanical properties
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others each | Others total | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5005 | 0.30 | 0.70 | 0.20 | 0.20 | 0.50–1.10 | 0.10 | 0.25 | – | 0.05 | 0.15 | Rem. |
| 5050 | 0.30 | 0.70 | 0.20 | 0.10 | 1.10–1.80 | 0.10 | 0.25 | – | 0.05 | 0.15 | Rem. |
| 5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.20–2.80 | 0.15–0.35 | 0.10 | – | 0.05 | 0.15 | Rem. |
| 5154 | 0.50 | 0.50 | 0.10 | 0.50 | 3.10–3.90 | 0.25 | 0.20 | 0.20 | 0.05 | 0.15 | Rem. |
| 5754 | 0.65 | 0.40 | 0.10 | 0.50 | 2.60–3.60 | 0.30 | 0.20 | 0.15 | 0.05 | 0.15 | Rem. |
| Alloy | Temper | Tensile min (MPa) | Tensile max (MPa) | Elongation (%) | Resistivity (nΩ·m) | Conductivity (% IACS) |
|---|---|---|---|---|---|---|
| 5005 | F | 165 | 205 | 15 | 33.10 | 52.00 |
| 5050 | F | 165 | – | 15 | – | – |
| 5050 | O | 125 | 145 | 20 | – | – |
| 5052 | F | 235 | – | 14 | 50.831 | 33.92 |
| 5154 | F | 210 | – | 8 | 56.19 | 30.69 |
| 5154 | O | – | 285 | 25 | 51.00 | 33.80 |
| 5754 | F | 200 | – | 14 | 43.103 | 40.00 |
Values are indicative of standard specifications. We also make customised grades to international standards and specific customer requirements, in multiple sizes and configurations.
Supply formats
- Wire rodCoils of 2.0 to 3.0 MT
- Drawn wire, 3.0 to 6.0 mmCoils up to 1.0 MT
6000 Series Aluminium Alloy Rods
Engineered for a combination of strength, corrosion resistance, machinability and formability, and used across electrical, automotive, transportation, construction, engineering and industrial applications.
Based on aluminium-magnesium-silicon compositions, these rods offer superior mechanical performance while staying lightweight, for durability, structural integrity and long service life. We supply electrical grades (6101, 6201) and mechanical grades (6061, 6063).
Key grades
- 6101
- 6201
- 6061
- 6063
Standards: ASTM B398, EN 573-3, AS 2848
Key advantages
- Heat-treatable for improved strength
- Good conductivity with mechanical reliability
- Excellent corrosion resistance
- Suitable for electrical and structural uses
- Enhanced mechanical strength
- Reliable in overhead conductors and fittings
Applications
- AAAC conductors
- Transmission and distribution hardware
- ADSS fittings and components
- Automotive, electrical, construction, industrial and infrastructure sectors
Chemical, electrical and mechanical properties
| Alloy | Si | Fe | Cu | Cr | Zn | Mn | Mg | B | Others each | Others total | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6101 | 0.40–0.80 | 0.50 | 0.10 | 0.03 | 0.10 | 0.03 | 0.50–0.80 | 0.06 | 0.03 | 0.10 | Rem. |
| 6201 | 0.50–0.90 | 0.50 | 0.10 | 0.03 | 0.10 | 0.03 | 0.60–0.90 | 0.06 | 0.03 | 0.10 | Rem. |
| Alloy | Product code | Temper | Diameter (mm) | Tensile min (MPa) | Elongation (%) | Resistivity (nΩ·m) | Conductivity (% IACS) |
|---|---|---|---|---|---|---|---|
| 6101 | Alloy 6101 (T4), sol. tr. | T4 | 9.50 ± 0.50 | 157 | 14 | 34.48 | 50 |
| 6101 | Alloy 6101 (T4), sol. tr. | T4 | 12.50 ± 0.50 | 157 | 14 | 34.48 | 50 |
| 6101 | Alloy 6101 (T8), sol. tr. | T8 | 3.00 to 6.00 | 295 | 3 | 32.53 | 53 |
Mechanical grade alloys: 6061 and 6063
6061 and 6063 contain silicon and magnesium, which combine to form magnesium silicide and make the alloys heat-treatable. The result is a balance of strength, formability and corrosion resistance suited to a wide range of mechanical and structural applications. Standards: EN 573-3, AS 2848.
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others each | Others total | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6061 | 0.40–0.80 | 0.70 | 0.15–0.40 | 0.15 | 0.80–1.20 | 0.04–0.35 | 0.25 | 0.15 | 0.05 | 0.15 | Rem. |
| 6063 | 0.20–0.60 | 0.35 | 0.10 | 0.10 | 0.45–0.90 | 0.10 | 0.10 | 0.10 | 0.05 | 0.15 | Rem. |
| Alloy | Temper | Diameter (mm) | Tensile min (MPa) | Elongation (%) | Resistivity (nΩ·m) | Conductivity (% IACS) |
|---|---|---|---|---|---|---|
| 6061 | M | 9.50 ± 0.50 / 12.50 ± 0.50 | 118 | 12 | 43.10 | 40 |
| 6061 | T4 | 9.50 ± 0.50 / 12.50 ± 0.50 | 177 | 14 | 43.10 | 40 |
| 6061 | T8 | 3.00 to 6.00 | 343 | 6 | 43.10 | 40 |
Values are indicative of standard specifications. We also make customised grades to international standards and specific customer requirements, in multiple sizes and configurations.
Supply formats
- Wire rodCoils of 2.0 to 3.0 MT
- Drawn wire, 4.0 to 6.0 mmCoils up to 1.0 MT
- Fine wire, 3.0 to 4.0 mmCoils up to 0.5 MT
8000 Series Aluminium Alloy Rods
Engineered for the right balance of conductivity, strength, flexibility and long-term reliability, for electrical conductors, power cables and specialised wire where performance and low weight matter.
Designed for the evolving needs of the power and electrical industry, they offer better mechanical properties than conventional electrical-grade aluminium while keeping excellent conductivity and processing performance.
Key grades
- 8030
- 8176
Standards: ASTM B800, EN 573-3, IS 733, AS 2848, UL DVVR2 for AWR8176
Key advantages
- Excellent conductivity and current-carrying capability
- Higher mechanical strength than conventional grades
- Lightweight, cost-effective alternative to copper
- Superior flexibility and formability
- Excellent creep and sag resistance
- Reliable wire drawing and processing
- Consistent metallurgy and dimensional accuracy
Applications
- Electrical conductors
- Power and distribution cables
- Building wires and service cables
- Utility and infrastructure projects
- Renewable energy transmission
- Overhead and underground power
- Industrial electrical systems
Chemical, electrical and mechanical properties
| Alloy | Si | Fe | Cu | Mg | Zn | Ga | B | V | Others each | Others total | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8030 | 0.10 | 0.30–0.80 | 0.15–0.30 | 0.05 | 0.05 | – | 0.001–0.04 | 0.03 | 0.03 | 0.10 | Rem. |
| 8176 | 0.03–0.15 | 0.40–1.00 | – | – | 0.10 | 0.03 | – | – | 0.05 | 0.15 | Rem. |
| Alloy | Product code | Temper | Diameter (mm) | Tensile min (MPa) | Tensile max (MPa) | Elongation (%) | Resistivity (nΩ·m) | Conductivity (% IACS) |
|---|---|---|---|---|---|---|---|---|
| 8030 | Available in different sizes and subtypes on request | |||||||
| 8176 | 8176 | F | 9.50 ± 0.50 | 95 | 110 | 14 | 28.45 | 60.6 |
| 8176 | 8176 | F | 12.00 ± 0.50 | 95 | 110 | 14 | 28.45 | 60.6 |
| 8176 | 8176 | F | 15.00 ± 0.50 | 89 | 95 | 14 | 28.45 | 60.6 |
| 8176 | 8176 | F | 22.00 ± 0.50 | 89 | 95 | 14 | 28.45 | 60.6 |
Values are indicative of standard specifications. We also make customised grades to international standards and specific customer requirements, in multiple sizes and configurations.
Supply formats
- Wire rodCoils of 2.0 to 3.0 MT
- Drawn wire, 3.0 to 6.0 mmCoils of 0.5 to 1.0 MT